Will the sub-floor effect my readings? The previously installed flooring measures 5/8” thick.
If the sub-floor is concrete, it will cause your readings to be higher than the actual moisture in the wood flooring. This is because the concrete is very dense. If the sub-floor is a wood composite such as OSB or plywood, and there is not a huge amount of moisture in the sub-floor (let’s say from flooding or other event), then the actual moisture measurement of the wood flooring will not be hugely affected. Keep in mind, that if you are trying to use your Wagner Meters unit as a forensic tool – such as determining moisture after the fact on a failed wood floor job – the meter’s readings are not telling you anything about what the moisture content was in the flooring before it was installed. All wood flooring, wood-based sub-flooring and concrete slabs should be measured (or at-depth relative humidity in the case of a concrete slab) prior to wood flooring being installed.
Please visit Moisture Problems Between the Flooring and the Slab for more information.
Latest posts by Wagner Meters (see all)
- Forest Industry Products Support & Training - July 2, 2018
- June 2018 Rapid RH® Newsletter – What’s the Right Moisture Level for Concrete? - June 26, 2018
- May 2018 Rapid RH® Newsletter – What if Your Concrete Won’t Dry? - May 31, 2018