|
Wagner Debuts an All New Insertion Tool
The Rapid RH® 4.0 EX continues that tradition of field-directed improvements and ASTM compliance with a more robust and extraordinarily useful multi-purpose insertion tool and associated procedures. The new Rapid RH® 4.0 EX insertion tool allows installers to know when they have a correctly-sized, uniformly round test hole. A multi-stepped and multi-purpose insertion tool, it is ergonomically superior to any prior Rapid RH® insertion tool design.
|
|
How bad could it be to ignore a little water vapor in concrete slabs? Well, that depends on the size of your budget for concrete flooring remediation. In tight budgets and tighter time frames, most builders don’t want to even consider it. However, remediation will be needed in some form if the professionals in the building chain ignore concrete moisture content...
|
|
From the Forum: Who Says Rapid Rh Reads High?
Tested a slab on grade, almost in the wash, probably one of the lowest points in the area as far as water tables run. Got readings of 67 to 70% rh @ 70 to 72 F. Getting tons of rain down here and water puddles in the yard. Home is 15 years old at least so doubt there is a vapor barrier underneath. I was certain I would get at least a 95% rh. Goes to show you never know....
Read rest of this post and contribute
|
|
|
|
Where to find the Rapid RH in 2012:
Harrogate
Harrogate, England Sept 2-4
Booth B15
|
|
|
Print Friendly
Bookmark Page
Send page to a friend
Find us on Facebook 
Follow us on Twitter
Shopping Cart (0 Items)
