Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Heat, move air, shotblast = lower results
08-07-2013, 12:35 PM, (This post was last modified: 08-07-2013, 03:46 PM by eaadams.)
#1
Heat, move air, shotblast = lower results
All tests done with Wagner 4.0.

Date / test site / RH / Temp

7-11 / #1 / 94 / 73
7-17 / #1 / 94 / not recorded
[heat turned on, air moved, floor received a light shotblast to a CSP of no more than 2]
7-30 / #1 / 94 / 79
8-07 - no test

7-11 / #2 / 96 / 73
7-17 / #2 / 91 / not recorded
[heat turned on, air moved, floor received a light shotblast to a CSP of no more than 2]
7-30 / #2 / [no reading / debris]
[hole vacuumed out of debris @ time of test]
8-07 - no test

7-11 / #3 / 91 / 74
7-17 / #3 / 99 / not recorded
[heat turned on, air moved, floor received a light shotblast to a CSP of no more than 2]
7-30 / #3 / 99 / 79
8-07 / #3 / 94 / 76

7-11 / #4 / 92 / 72
7-17 / #4 / 92 / not recorded
[heat turned on, air moved, floor received a light shotblast to a CSP of no more than 2]
7-30 / #4 / 91 / 79
8-07 / #4 / 91 / 75

7-11 / #5 / 99 / 72
7-17 / #5 / 99 / not recorded
[heat turned on, air moved, floor received a light shotblast to a CSP of no more than 2]
7-30 / #5 / 94 / 79
8-07 - no test


Obviously the slab temp went up when we cranked the HVAC. I think removing the old adhesive with the light shotblast helped a lot to let moisture out just over one month.
Quote this message in a reply


[-]
Share/Bookmark (Show All)
Facebook Twitter Linkedin Technorati Digg MySpace Delicious

Messages In This Thread
Heat, move air, shotblast = lower results - eaadams - 08-07-2013, 12:35 PM