Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
measurement in a cold slab
12-05-2012, 05:47 AM, (This post was last modified: 12-05-2012, 05:50 AM by CCR.)
#2
RE: measurement in a cold slab
You didn't mention the ambient conditions during the required test period of 72 hours. If the slab is 51 degrees, I would guess the ambient condiitons of the space are not within ASTM F2170-11 standards. The space MUST be placed in operating conditions for 48 hours prior to conductiong the RH test and remain at operating conditions during the 72 hour test period. You need to refer to the document and follow the standards outlined.
JK Nixon
Concrete Restoration Services, LLC
Pittsburgh, PA
http://www.rhtester.com
Quote this message in a reply


[-]
Share/Bookmark (Show All)
Facebook Twitter Linkedin Technorati Digg MySpace Delicious

Messages In This Thread
measurement in a cold slab - Noweare - 12-04-2012, 02:45 PM
RE: measurement in a cold slab - CCR - 12-05-2012, 05:47 AM
RE: measurement in a cold slab - Noweare - 12-05-2012, 10:59 AM
RE: measurement in a cold slab - eaadams - 12-19-2012, 01:22 PM
RE: measurement in a cold slab - CCR - 12-19-2012, 02:12 PM
RE: measurement in a cold slab - Ernesto - 12-19-2012, 03:18 PM
RE: measurement in a cold slab - eaadams - 12-19-2012, 03:19 PM
RE: measurement in a cold slab - Ernesto - 12-20-2012, 03:37 PM
RE: measurement in a cold slab - eaadams - 12-20-2012, 04:23 PM
RE: measurement in a cold slab - Ernesto - 12-20-2012, 06:23 PM
RE: measurement in a cold slab - eaadams - 12-21-2012, 04:29 PM
RE: measurement in a cold slab - eaadams - 01-18-2013, 05:02 PM
RE: measurement in a cold slab - eaadams - 11-05-2013, 12:08 PM
RE: measurement in a cold slab - Ernesto - 04-15-2014, 02:30 PM