• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ASTM 2170-11

#1
Is RapidRH 4.0 compatible with ASTM 2170-11? Did the 2011 update have anything we should know / be on the lookout about?
Reply

#2
Did you buy the ASTM yet? I didn't. Blush

Wait. Maybe I did! Huh

My memory is so bad.... I think I did buy it, now where did I put it? Question
JD Grafton
Concrete Answers for Flooring Problems
[email protected]
Reply

#3
I bought the old one. Just not hugely interested in 2011 unleashed there is something in it I can spec to a/d people.
Reply

#4
You know a guy could go broke buying ASTM's ...

Maybe Jason could post them here for 'review'.Tongue
JD Grafton
Concrete Answers for Flooring Problems
[email protected]
Reply

#5
@EA-2170-11 changes in a nutshell (and its better to read yourself in case I miss something):

1) Dictates specifically how far, from the bottom of the hole, the sensor can "live". .625 +- .125
2) Dictates that sensor sleeves must line hole completely from top to bottom.
3) Sleeve must have ribs/fins at bottom of sleeve and at the .625 of the sleeve. This is to isolate the sleeve from the concrete. Must also have an isolation gasket inside the sleeve at the .625 from bottom depth to isolate the sensor from the sleeve. Bottomline, they are trying to do what they can to isolate that very small space of air at .625" from bottom of hole. SOUND FAMILIAR?
4) Sensor must only obtain readings from the bottom of the sleeve. No knockouts and reading from the side.

You should get the standard, there are pictures that do better at explaining.

@JD-"post the ASTM for review"-NICE!! If I had your money I would burn mine. Big Grin An ATV with power steering--Must be nice!

Jason
Reply

#6
Thanks for the update Jason!

Yeah power steering... Who would have seen that coming?

Okay, are you changing the probes again to have full height sleeves? Or will a tube in a tube work to meet the requirement?
JD Grafton
Concrete Answers for Flooring Problems
[email protected]
Reply

#7
(10-03-2011, 08:36 AM)CC Solutions Wrote:  Thanks for the update Jason!

Yeah power steering... Who would have seen that coming?

Okay, are you changing the probes again to have full height sleeves? Or will a tube in a tube work to meet the requirement?

Ea, I believe the wagner sensors don't need a sleeve to the top because they only read that teensy weensy airspace at the bottom of the hole. Is that what your talking about?

Stephen Perrera dba
Top Floor Installation Co.
http://www.tucsonazflooring.com
http://www.floorsavior.com
Reply

#8
(10-03-2011, 01:10 PM)Ernesto Wrote:  
(10-03-2011, 08:36 AM)CC Solutions Wrote:  Thanks for the update Jason!

Yeah power steering... Who would have seen that coming?

Okay, are you changing the probes again to have full height sleeves? Or will a tube in a tube work to meet the requirement?

Ea, I believe the wagner sensors don't need a sleeve to the top because they only read that teensy weensy airspace at the bottom of the hole. Is that what your talking about?


Jason said the sleeve must be the entire depth of the hole. He did not say if the sleeve can be two piece.

Don't disturb him now, it's nappy time... Big Grin

JD Grafton
Concrete Answers for Flooring Problems
[email protected]
Reply

#9
Is RapidRH 4.0 compatible with ASTM 2170-11?
Reply

#10
(10-03-2011, 01:27 PM)eaadams Wrote:  Is RapidRH 4.0 compatible with ASTM 2170-11?

Would they sell it if it weren't?



Stephen Perrera dba
Top Floor Installation Co.
http://www.tucsonazflooring.com
http://www.floorsavior.com
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  ASTM 2170-11 eaadams 0 853 04-15-2014, 09:33 AM
Last Post: eaadams
  ASTM F3010 - 13 eaadams 1 2,849 02-25-2014, 05:54 PM
Last Post: CC Solutions

Digg   Delicious   Reddit   Facebook   Twitter   StumbleUpon  


Users browsing this thread:
1 Guest(s)