Concrete Moisture Measurement Forums / Concrete / Moisture Measurement in Concrete v / measurement in a cold slab

Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
measurement in a cold slab
12-04-2012, 02:45 PM
Post: #1
Noweare
Newbie
 		Posts: 2
Joined: Dec 2012
measurement in a cold slab
Hello All, my first time using the rapidRH on a concrete slab. The RH came back as 90% rh at 51 deg F. We were planning to coat this floor with epoxy. The building is on top of a hill and on all sides the terrain is slopped down and away. The heat is turned down since they are not currently
using it. Is there a correction I can apply to my readings to correct for
the cold conditions.
Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


[-]
Share/Bookmark (Show All)
Facebook Twitter Linkedin Technorati Digg MySpace Delicious

Messages In This Thread
measurement in a cold slab - Noweare - 12-04-2012 02:45 PM
RE: measurement in a cold slab - CCR - 12-05-2012, 05:47 AM
RE: measurement in a cold slab - Noweare - 12-05-2012, 10:59 AM
RE: measurement in a cold slab - eaadams - 12-19-2012, 01:22 PM
RE: measurement in a cold slab - CCR - 12-19-2012, 02:12 PM
RE: measurement in a cold slab - Ernesto - 12-19-2012, 03:18 PM
RE: measurement in a cold slab - eaadams - 12-19-2012, 03:19 PM
RE: measurement in a cold slab - Ernesto - 12-20-2012, 03:37 PM
RE: measurement in a cold slab - eaadams - 12-20-2012, 04:23 PM
RE: measurement in a cold slab - Ernesto - 12-20-2012, 06:23 PM
RE: measurement in a cold slab - eaadams - 12-21-2012, 04:29 PM
RE: measurement in a cold slab - eaadams - 01-18-2013, 05:02 PM



Contact Us | Return to Top | Return to Content | RSS Syndication