• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tools You Can Use

#7
Craftsman vacs are notorious for that. The DeWalt I described is great. However, I dump the dust and blow out the filter behind my house with a leaf blower after every testing job. If you prefer electric, I also have a Rigid I bought off the Home Depot web site. Still use it as a back up on big jobs if needed. You won't find this particular model in the stores. It looks like a slightly oversize tool box. It runs about $100. Don't get the similar sized one with wheels. The tool box design is tons easier to carry around a job site. Plus, it has a storage compartment inside for the hose and attachments. You'll need to use the replacable hepa filters though to be dust-free. Those can be found at the stores and run about $11 for 2. They last a good while though. Only thing about the filters is that you have to position them just right inside the vac or the interior housing will tear them. Found out I did that a couple of times on jobs and had to seal the tears up with duct tape. Good luck!
JK Nixon
Concrete Restoration Services, LLC
Pittsburgh, PA
http://www.rhtester.com
Reply


Messages In This Thread
Tools You Can Use - CCR - 01-17-2013, 05:27 AM
RE: Tools You Can Use - Rubensgt40 - 01-17-2013, 06:43 PM
RE: Tools You Can Use - CCR - 01-18-2013, 02:22 PM
RE: Tools You Can Use - jim decker - 03-23-2013, 07:35 AM
RE: Tools You Can Use - CCR - 03-23-2013, 08:44 AM
RE: Tools You Can Use - hausenheimer - 03-23-2013, 10:28 AM
RE: Tools You Can Use - CCR - 03-23-2013, 10:57 AM
RE: Tools You Can Use - hausenheimer - 03-24-2013, 05:58 AM
RE: Tools You Can Use - CC Solutions - 03-25-2013, 06:06 AM
RE: Tools You Can Use - eaadams - 04-29-2013, 04:23 PM
RE: Tools You Can Use - CCR - 04-29-2013, 05:17 PM
RE: Tools You Can Use - CCR - 09-05-2013, 05:13 AM
RE: Tools You Can Use - eaadams - 09-13-2013, 09:15 AM

Digg   Delicious   Reddit   Facebook   Twitter   StumbleUpon  


Users browsing this thread:
1 Guest(s)