• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
high rh in concrete

#1
Before flooring is installed how can you lower rh to acceptable
levels.concrete is poured six months rh is still reading at 90%
Reply

#2
when I get jobs like this I go through my standard checklist:

Is there a vapor retarder under the slab?
Is the HVAC on?
Is the surface hard troweled?

If you have no vapor retarder, or the HVAC isn’t on or hasn’t been on very long, or if the surface is hard troweled, you’re in for a long drying process. The easiest, although not the cheapest, option is to put an epoxy or some sort of moisture seal on that will prevent the RH from getting to your floor covering. Or you could put some dehumidifiers in the room to possibly speed up the drying process.
Reply

#3
THANK YOU VERY HELPFULL
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  ICRI pH testing Concrete Repair Bulletin eaadams 4 2,394 05-20-2014, 12:00 PM
Last Post: Ashok Kakade
  35-40 year old concrete with moisture problems Tscdad 13 7,299 05-19-2014, 10:55 AM
Last Post: eaadams
  Concrete Hood Method Blake McFee 9 27,249 11-08-2013, 01:41 PM
Last Post: eaadams
  RH in Concrete for Wood Floor with Vapor Membrane eaadams 35 63,821 05-01-2013, 07:20 AM
Last Post: jim decker
Question Concrete Cork Sandwich Floor System JKJeremy 4 8,215 01-30-2013, 04:43 PM
Last Post: eaadams
  Who Says Rapid Rh Reads High? Ernesto 3 9,303 08-20-2012, 07:07 PM
Last Post: CC Solutions
  Self consolidating concrete (SCC) eaadams 32 60,270 05-08-2012, 07:04 AM
Last Post: CC Solutions
  World of Concrete 2012 eaadams 0 3,426 03-23-2012, 09:40 AM
Last Post: eaadams
  Old concrete slab moisture DeanC 23 50,509 12-15-2011, 01:20 AM
Last Post: foxgeorge
  High Rapid RH readings?? ddemento 49 81,028 12-08-2011, 06:03 PM
Last Post: Ernesto

Digg   Delicious   Reddit   Facebook   Twitter   StumbleUpon  


Users browsing this thread:
1 Guest(s)