• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ASTM 2170-11

#11
Well everybody else does!!!

Jason is about to wake up from his late day nap. He'll be here shortly.
JD Grafton
Concrete Answers for Flooring Problems
[email protected]
Reply

#12
I talked to Jason around noon my time and probably bored him to sleep. Big Grin

If you can answer my question about static electricity and senors I'll tell ya what he said about you. http://www.wagnermeters.com/concreteforum/Thread-Debris-in-the-Sensor
Stephen Perrera dba
Top Floor Installation Co.
http://www.tucsonazflooring.com
http://www.floorsavior.com
Reply

#13
YAWN-Nappy time over Sleepy


Is RapidRH 4.0 compatible with ASTM 2170-11?

NO manufacturer in the marketplace, that I am aware of, is 100% compatible with this latest revision. The Rapid RH is one of the closest, as you can see based on my quick outline, and would see even clearer if you had the revision and saw the drawings. There will be a transitional phase for all, some worse than others, in order to attempt to make RH readings more reproducible among the different devices currently available in the marketplace.

Jason said the sleeve must be the entire depth of the hole. He did not say if the sleeve can be two piece.

JD-I really liked this comment.Undecided

Jason
Reply

#14
(10-03-2011, 03:30 PM)rapidrhrep Wrote:  YAWN-Nappy time over Sleepy


Is RapidRH 4.0 compatible with ASTM 2170-11?

NO manufacturer in the marketplace, that I am aware of, is 100% compatible with this latest revision.

Jason said the sleeve must be the entire depth of the hole. He did not say if the sleeve can be two piece.

JD-I really liked this comment.Undecided

Jason

WELLQuestion Sleeves can be two pieces. Much easier to adjust for depth. The anti-tank weapons I used to shoot in the Army had a two-piece tube that extended out to make the barrel that fired the rocket. You could do something like that (without the explosives though... Aw heck, make every hundreth one a 'surprise!' to keep us sharp.) Big Grin

JD Grafton
Concrete Answers for Flooring Problems
[email protected]
Reply

#15
Yes and perhaps it can pop up when dry. Like a butterball turkey thermometer. Smile

[Image: M72+LAW+ROCKET+LAUNCHER,+66mm%28Light+An...pon%29.jpg]

Reply

#16
YOU GUYS ALL SCARE ME SOMETIMES!!

Jason
Reply

#17
That's the one..
A L.A.W.
Light Anti-tank Weapon

I qualified as 'Marksman' with that bad boy.... Had to shoot moving tanks at various distances.... It was a blast!!
JD Grafton
Concrete Answers for Flooring Problems
[email protected]
Reply

#18
(10-12-2011, 07:00 PM)CC Solutions Wrote:  That's the one..
A L.A.W.
Light Anti-tank Weapon

I qualified as 'Marksman' with that bad boy.... Had to shoot moving tanks at various distances.... It was a blast!!

A marksman.....a tank....isin't that like hitting the broadside of a barn? Tongue

Stephen Perrera dba
Top Floor Installation Co.
http://www.tucsonazflooring.com
http://www.floorsavior.com
Reply

#19
(10-13-2011, 06:50 AM)Ernesto Wrote:  
(10-12-2011, 07:00 PM)CC Solutions Wrote:  That's the one..
A L.A.W.
Light Anti-tank Weapon

I qualified as 'Marksman' with that bad boy.... Had to shoot moving tanks at various distances.... It was a blast!!

A marksman.....a tank....isin't that like hitting the broadside of a barn? Tongue

Actually it's not! There are different sights for different distances as the rocket drops quite a bit as it flies. Then you have to lead the tank quite a bit and you have to hit it in a vital spot like a drive wheel or between the turret and the track. The rocket tip is really cool because it can penetrate through thick steel and when it gets inside it explodes (probably because it was just compressed going through the thick armor) and makes a real mess inside...

I was always nervous that as the rocket leaves the tube the flame out the back would burn my face off, but it doesn't. It's loud as heck though!

Everyone should have the opportunity to fire a LAW weapon... Maybe at the big Wagner picnic this spring we can get a few pallets of anti-tank weapons and have a good ol' time Exclamation

JD Grafton
Concrete Answers for Flooring Problems
[email protected]
Reply

#20
That would be fun. I would settle for some RPG's. Those guys on the Myth Busters Show got to play with some.
Stephen Perrera dba
Top Floor Installation Co.
http://www.tucsonazflooring.com
http://www.floorsavior.com
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  ASTM 2170-11 eaadams 0 818 04-15-2014, 09:33 AM
Last Post: eaadams
  ASTM F3010 - 13 eaadams 1 2,793 02-25-2014, 05:54 PM
Last Post: CC Solutions

Digg   Delicious   Reddit   Facebook   Twitter   StumbleUpon  


Users browsing this thread:
1 Guest(s)