+- Concrete Moisture Measurement Forums (http://www.wagnermeters.com/concreteforum)
+-- Forum: Concrete (/forumdisplay.php?fid=1)
+--- Forum: Best Practices on the Job (/forumdisplay.php?fid=3)
+--- Thread: SERVICE TEMPERATURE (/showthread.php?tid=63)
SERVICE TEMPERATURE - MINUS - 09-02-2010 10:25 AM
What is the best way to verify service temperture and humidity 48hr before rh testing? If you use a data loger where should it be placed?
Thank you
RE: SERVICE TEMPERATURE - Ernesto - 09-03-2010 08:09 AM
I typically meet the client before hand to check out the site. I leave a thermhygrometer that records the past couple days. Just a cheapy one from radio shack. But then I don't do wide open commercial stuff either.
I think the best placement is right on the slab.
RE: SERVICE TEMPERATURE - CC Solutions - 09-20-2010 02:28 PM
I look around and ask around. Because my work extends across state lines, I can't be there 48 hours ahead of time usually, but I can see if the building is enclosed, HVAC on or not, windows open etc.