+- Concrete Moisture Measurement Forums (http://www.wagnermeters.com/concreteforum)
+-- Forum: Concrete (/forumdisplay.php?fid=1)
+--- Forum: Moisture Measurement in Concrete (/forumdisplay.php?fid=2)
+--- Thread: temperature measurment (/showthread.php?tid=49)
temperature measurment - arash.atashnama - 05-29-2010 10:18 AM
hi !
could anyone help me to find an instrument which i could measure the temperature at one point inside of concrete!!
RE: temperature measurment - CC Solutions - 05-31-2010 08:12 AM
Hello!
You can use the Wagner Rapid RH to accurately measure temperature inside concrete. You can place the probe at any depth and read both relative humidity and temperature with certified accuracy. The probes are fast, easy to install and inexpensive.
RE: temperature measurment - arash.atashnama - 06-01-2010 08:36 AM
could you please tell me how does it measure the temperature?
i though that it just measure the moisture!!
RE: temperature measurment - CC Solutions - 06-01-2010 08:20 PM
The sensor accurately measures both temperature and humidity. They are NIST certified and easy to use. You will not be disappointed!
The LCD display will show you both temperature and relative humidity.
RE: temperature measurment - arash.atashnama - 06-04-2010 03:29 AM
ok! tnx
but just one another question!
are rapidrh just for one usage?
or i can use them for several times?
RE: temperature measurment - CC Solutions - 06-04-2010 09:31 PM
The Rapid RH probes were designed to seal quite tightly in the hole they are inserted in. This insures precise measurement at a precise depth, which is one reason the probes are so accurate and reliable.
This tight fit makes them very hard to remove, and if they are removed the sealing flange may be damaged. They are intended for a single installation in concrete. Although I have seen some removed and re-used, I don't recommend the practice.