+- Concrete Moisture Measurement Forums (http://www.wagnermeters.com/concreteforum)
+-- Forum: Concrete (/forumdisplay.php?fid=1)
+--- Forum: Moisture Measurement in Concrete (/forumdisplay.php?fid=2)
+--- Thread: Pre Cast / Self Leveling (/showthread.php?tid=368)
Pre Cast / Self Leveling - JDJR - 01-21-2013 11:45 AM
is there " White Paper " out there on RH Testing of Pre Cast that is covered by self leveling.
RE: Pre Cast / Self Leveling - CCR - 01-24-2013 05:05 PM
Not that I'm aware of. Why would you want to test AFTER the self-leveler is installed? All testing should be done BEFORE any topping, skimcoat or self-leveler is installed because moisture mitigation systems should be installed directly over ther affected concrete. There are a couple of MM products that claim they can be installed over self-levelers but I'm not so sure that's a good thing. And until I see it for myself, I simply don't believe it.
RE: Pre Cast / Self Leveling - jhout32 - Today 01:31 PM
I have a job that has structural plank with a 3" cement based topping over it, can RH testing be performed to verify the moisture content of the topping? I have attached the mix specifications with page 1 being the topping over the plank.