+- Concrete Moisture Measurement Forums (http://www.wagnermeters.com/concreteforum)
+-- Forum: Concrete (/forumdisplay.php?fid=1)
+--- Forum: General Discussions (/forumdisplay.php?fid=6)
+--- Thread: is it possible to replace just two squares of a patio? (/showthread.php?tid=341)
Pages: 1 2
is it possible to replace just two squares of a patio? - lean - 10-11-2012 11:49 AM
Hello. I just have a concrete patio done. It is cut into rectangles. Two of the rectangles got curvy and rain water stays in them. Can one replace just these two blocks? Is it difficult? Thank you
RE: is it possible to replace just two squares of a patio? - CC Solutions - 10-13-2012 08:39 PM
Hello and welcome!
Yes you can cut the cupped pieces out and replace them, or you can apply a topical concrete dressing which will fill the low areas, or you could grind them down to be flat (but that will expose aggregate and look kind of weird unless you grind the entire thing.....)
The easiest and fastest would be to apply a concrete repair dressing like Ardex CD. This patch will stand up to vehicle traffic, is easy to mix and place and very fast drying.
RE: is it possible to replace just two squares of a patio? - ILLENTINC - 11-15-2012 02:24 PM
(10-11-2012 11:49 AM)lean Wrote: Hello. I just have a concrete patio done. It is cut into rectangles. Two of the rectangles got curvy and rain water stays in them. Can one replace just these two blocks? Is it difficult? Thank you
Hello,
If you are still looking for a solution....
Meet MG-Krete by Imco Technologies
http://illianaenterprises.com/meet-mg-krete-by-imco-technologies-2/
MG Krete is the best kept secret and ABSOLUTE BEST option for concrete repair and restoration.
RE: is it possible to replace just two squares of a patio? - CC Solutions - 11-15-2012 02:30 PM
Let's not turn this forum into a sales platform....
RE: is it possible to replace just two squares of a patio? - ILLENTINC - 11-15-2012 02:38 PM
(11-15-2012 02:30 PM)CC Solutions Wrote: Let's not turn this forum into a sales platform....
You recommended a product. I recommended a product.
RE: is it possible to replace just two squares of a patio? - CC Solutions - 11-15-2012 02:40 PM
I don't sell the product. What you are doing is advertising and it is not allowed here. Sorry.
RE: is it possible to replace just two squares of a patio? - eaadams - 11-19-2012 11:26 AM
I think CC Solutions should be granted Admin privileges. That is the sort of post that should meet a banhammer.
RE: is it possible to replace just two squares of a patio? - Rubensgt40 - 11-19-2012 09:06 PM
That's very ethical of you JD- I know how badly you want to spruke the CC Solutions Concri-Hyper-Mega-Boost 2000*, and the free Packers Cheesy-Head Hat with each purchase.**
Grinding is only economical over large areas too. Not many contractors would pull out a grinder for only a couple of square yards or whatnot.
Why would those bits have curled and not others. Are we talking about one pour, cut all the way through, or just feature cuts to the surface?
*fictional product. Don't write in.
**You don't really get a free Green Bay hat. Because it's a fictional product.
RE: is it possible to replace just two squares of a patio? - CC Solutions - 11-20-2012 06:54 AM
[attachment=34]
Cheese Head hats fictional? I think not!!!
RE: is it possible to replace just two squares of a patio? - Rubensgt40 - 11-20-2012 02:11 PM
(11-20-2012 06:54 AM)CC Solutions Wrote: Cheese Head hats fictional? I think not!!!
Poor wording on my part- I know the cheesy hats exist, I see them every time I watch NFL replays. Funny how I never have a craving for dry biscuits until I watch a Packers game...
Once again I've driven this post into a ditch