+- Concrete Moisture Measurement Forums (http://www.wagnermeters.com/concreteforum)
+-- Forum: Concrete (/forumdisplay.php?fid=1)
+--- Forum: Rapid RH Q&A (/forumdisplay.php?fid=5)
+--- Thread: 100% (/showthread.php?tid=312)
100% - eaadams - 07-12-2012 01:19 PM
Does Wagner go to 100% (spinal tap anyone) or does it max out at 99%? I've never seen 100%.
Does ASTM allow for 100% as I see some tech data sheets that mention 100% from concrete companies.
RE: 100% - CC Solutions - 07-12-2012 01:40 PM
The readers go to 99%.
The product design committee asked Jason if they should insert another LCD decimal place or if he wanted to spend the design money on a trip to Hawaii.... To which Jason replied: "Mahalo nui loa!":D
RE: 100% - CCR - 07-12-2012 02:48 PM
When the RH level exceeds 99%, the LED reads "Hi"
RE: 100% - rapidrhrep - 07-12-2012 02:58 PM
@ Mr Grafton or should I address you as Sage Grafton----ALOHA!!
@ Mr Nixon: You are absolutely correct, regarding reading "Hi" on the older blue versions. When we transitioned to the orange 4.0 version, we revised the firmware to just read 99% max.
Jason
RE: 100% - CCR - 07-12-2012 05:03 PM
Thanks, Jason. Didn't know of the change. Just figured I hadn't encountered any substrates that high.