06-14-2012, 10:31 AM
(This post was last modified: 06-14-2012, 10:34 AM by eaadams.)
I am looking for advise on establishing a RH for a wood floor system. (special system from Europe very dimensionally stable)
The flooring has a RH limit of 90% over 6-mil poly that has a perm of 0.06.
I want to put the flooring down over 15-mil poly with a perm of 0.018-0.01. (83% less)
What RH should the concrete be? perhaps 83% of the difference between 90 & 100? So that would be 98% rH? I don't think it is a sliding linear scale though.
Yea I'm considering Stego so ... a little better than poly. Perm of 0.01
Good point, I don't want it degrading over time. I wonder what is a more harsh enviroment, in between concrete, or under a floating moving floor.
Poly sheet is risky with wood is what I've always heard. How much is a roll of the dice. For my money, I'd want Koester or Ardex MC with a 15 year warranty under my wood floor.
I attended a wood flooring job where a slab took moisture from a plumbing failure. There was poly sheeting on the slab, 12mm ply then 13mm overlay solid timber. The whole thing buckled like buggery. So there are definitely points which poly cannot withstand. As JD always advises- see what the warranty says!
The problem with socialism is that you soon run out of other people's money.
- Margaret Thatcher
Seems maybe the seams were open, or the plastic failed or something.
1) Yes we would all like Koster or Ardex under the floor but at $4.50 sf it isn't cost effective.
2) If there was a plumbing leak the existing wood floor would have fallen apart. Also a plumbing leak defeat any Koster or Ardex anyway. I had one job where the bleacher guys drilled into a water pipe when mounting the bleachers to the wall. The floor was saved thanks to a great superintendent on the job who took car jacks and jacked up the entire wood floor system 5', ran fans and dehumidifiers all night. Cost them a pretty penny for the fix (~1/4 of the floor had to be replaced) but it wasn't a total loss.
When it comes to Warranties, if you have to go to the Warranty you are screwed anyway. I was talking to my REEF rep (0.22 s/f) and was discussing the perm tests with him. He discounted the perm ratings. However his product is fiber re-inforced which might work better under a floor for wear and tear over time. The Stego (0.20 s/f) rep pushes the perm tests but discounted any abrasion over time.
Still though, no one has provided me any guidance as to my original question as to how to select an RH guide. Just a lot of talk. Just like Calcium Chloride is used as a 'well it should be about X pounds' I am getting the feeling the way people come up with RH guide numbers is not based in any science or logic.