Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MMS- Are some unreliable with high RH?
11-10-2011, 08:20 PM
Post: #34
RE: MMS- Are some unreliable with high RH?
(11-10-2011 08:09 PM)Ernesto Wrote:  You should look up the definition of "Or".

No one could possibly predict what the slabs MVER will be in the future, the reading is prior to installation, wrong again.

I know what I'm talking about here, this I can guarantee you. You call Bostik and ask what their position will be if you put their glue down on a 70% floor or a 3 lb floor with no vapor retarder and if in two years the floor becomes 24 lbs MVER and 99% RH... Ask if they'll warrant that installation because it was good before... LOL.

And I know what OR means. If you have no vapor retarder, OR a failed vapor retarder, OR more than 12lbs MVER, OR more than 82% RH, you cannot use our product... That sure doesn't mean you can pick any one of those conditions... Dodgy

JD Grafton
Concrete Answers for Flooring Problems
[email protected]
Find all posts by this user
Quote this message in a reply
Post Reply 


[-]
Share/Bookmark (Show All)
Facebook Twitter Linkedin Technorati Digg MySpace Delicious

Messages In This Thread
RE: MMS- Are some unreliable with high RH? - CC Solutions - 11-10-2011 08:20 PM