Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cork flooring
12-02-2012, 03:00 PM
Post: #6
RE: Cork flooring
If you coat them after installation you'd need a goopy, solvent-based polyurethane as water-based coatings generally aren't thick enough even for high-density cork. I thought the solvent-based polys were mostly outlawed in the USA?

Pat Atherton
Floor Test Australia
www.moisturetesting.com.au

Our beer is not expensive, just less cheap.
Find all posts by this user
Quote this message in a reply
Post Reply 


[-]
Share/Bookmark (Show All)
Facebook Twitter Linkedin Technorati Digg MySpace Delicious

Messages In This Thread
Cork flooring - CC Solutions - 12-01-2012, 09:37 AM
RE: Cork flooring - CCR - 12-01-2012, 11:55 AM
RE: Cork flooring - Ernesto - 12-01-2012, 05:25 PM
RE: Cork flooring - CC Solutions - 12-01-2012, 06:52 PM
RE: Cork flooring - CCR - 12-02-2012, 10:21 AM
RE: Cork flooring - Rubensgt40 - 12-02-2012 03:00 PM
RE: Cork flooring - CC Solutions - 12-03-2012, 01:32 PM
RE: Cork flooring - eaadams - 12-03-2012, 02:06 PM
RE: Cork flooring - CCR - 12-03-2012, 03:15 PM
RE: Cork flooring - Rubensgt40 - 12-03-2012, 06:55 PM
RE: Cork flooring - CC Solutions - 12-04-2012, 10:41 AM
RE: Cork flooring - Ernesto - 12-04-2012, 08:40 PM
RE: Cork flooring - CC Solutions - 12-05-2012, 07:46 AM
RE: Cork flooring - CC Solutions - 12-07-2012, 07:18 PM
RE: Cork flooring - CCR - 12-09-2012, 05:55 AM
RE: Cork flooring - CC Solutions - 12-09-2012, 09:42 AM
RE: Cork flooring - CCR - 12-09-2012, 10:19 AM
RE: Cork flooring - CC Solutions - 12-09-2012, 10:42 AM
RE: Cork flooring - CCR - 12-09-2012, 11:11 AM
RE: Cork flooring - CC Solutions - 12-20-2012, 09:38 PM
RE: Cork flooring - CCR - 12-21-2012, 07:20 AM
RE: Cork flooring - CC Solutions - 12-21-2012, 08:40 AM
RE: Cork flooring - CCR - 12-21-2012, 09:11 AM
RE: Cork flooring - CC Solutions - 12-21-2012, 10:05 AM
RE: Cork flooring - eaadams - 12-22-2012, 11:49 AM
RE: Cork flooring - CC Solutions - 12-22-2012, 03:07 PM
RE: Cork flooring - jim decker - 04-29-2013, 08:36 PM