Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ASTM F2170 Certification?
06-25-2009, 07:37 AM
Post: #1
ASTM F2170 Certification?
What papers do I need for making sure I'm compliant with ASTM F2170? Is there any special procedire for that?

Thanks for your help, as always.
Find all posts by this user
Quote this message in a reply
06-25-2009, 01:26 PM
Post: #2
RE: ASTM F2170 Certification?
You can hire a third party testing firm to perform the testing.
Quote this message in a reply
06-26-2009, 08:21 AM (This post was last modified: 06-26-2009 08:24 AM by Blake McFee.)
Post: #3
RE: ASTM F2170 Certification?
what testing method are you planning on using?
Quote:You can hire a third party testing firm to perform the testing.

Yes, you can, and in some cases I'd suppose that would make life easier. However, if you want to do a rh test, for instance, there's no reason that you couldn't do it yourself, at least that I can see. Is there?
Find all posts by this user
Quote this message in a reply
08-13-2009, 02:45 PM
Post: #4
RE: ASTM F2170 Certification?
Ok, so once you have done the test what is the RH% cut off? 75% RH?
80% RH? I don't know of any suppliers that list a RH% maximum. With the calcium Chloride test you can acertain a psi nuimber. Put down a vapor retarder and measure vapor pressure again to see if you are within the suppliers range <3 psi but the RH in the slab will be the same. Right?
Find all posts by this user
Quote this message in a reply
08-14-2009, 07:47 AM
Post: #5
RE: ASTM F2170 Certification?
I know of a number of major manufacturers that have developed maximum limits for their products; among others, Armstrong, Forbo and Nora. For wood, the National Wood Flooring Association has, for a number of years, had a recommended maximum of 75%.

I also understand that there is no correlation between CaCl values and RH readings because they are not reading the same thing.
Quote this message in a reply
09-22-2009, 07:03 AM
Post: #6
RE: ASTM F2170 Certification? Stauf????
I was talking to a rep for Stauf about rh testing and what their number was, they do not have one on their website. He said they will not test their product for any number and only want CaCl tests performed because they do not spprove of the rh test.

And this coming from a German manufacture?? Thats gotta throw a stick into the spokes eh?
Visit this user's website Find all posts by this user
Quote this message in a reply
09-22-2009, 03:52 PM
Post: #7
RE: ASTM F2170 Certification?
I didn't think that anyone outside of N.America specified CaCl tests.
Find all posts by this user
Quote this message in a reply
09-24-2009, 04:08 PM
Post: #8
RE: ASTM F2170 Certification?
Ben, neither did I. I have no clue as to what they specify outside the U.S. I only know what the rep said and what is on their installation specs. Go read it.
Visit this user's website Find all posts by this user
Quote this message in a reply
12-16-2009, 12:13 PM
Post: #9
RE: ASTM F2170 Certification?
We need to teach the manufacturer's yet.... Big Grin

CaCl will be phased out of the US over the next 2-3 years.

As far as certified testing of RH? Nothing yet, but I'd like to see a certification program created.... I'm working on that one!

Even if you do hire out testing to a third party, be sure to watch the testing take place!!!! I have documented a 90% + rate of improper testing in the field.

And I always recommend taking several of your own tests. As long as your numbers and the tester's numbers jive, you can rest easy. But if there is a wide disparity you can look for the reason and verify your numbers.

Where the rubber hits the road is not in initial testing, but when there is a failure and the floor is opened up and new tests are installed. That is when you want to be sure all the testing you did previously was done properly, because now is when you're going to find out if you missed something important!

JD Grafton
Concrete Answers for Flooring Problems
[email protected]
Find all posts by this user
Quote this message in a reply
12-23-2009, 08:55 AM
Post: #10
RE: ASTM F2170 Certification?
CaCl phasing out? for real? I'm ready for that day!
Find all posts by this user
Quote this message in a reply
Post Reply 


[-]
Share/Bookmark (Show All)
Facebook Twitter Linkedin Technorati Digg MySpace Delicious